This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: Seems to work fine now after Rocky fixed it up. Make sure you know what your units are of the. Stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. I opened a customer model and it looked correct until I made a measurement and it was 12" the real measurement was 0.473 or 12mm. The mesh features are for visualization purposes and cannot be modified.
As shipped, Autodesk Inventor creates mesh features when you import mesh data from certain file formats. The customer exported in mm and I imported in inch. The Mesh Enabler started out as a technology preview of an add-on for Autodesk Inventor. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the. stl came in fine and matched what the customer had. stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.Įvan, What I did is when you go to open your. stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally.
Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. Evan, What I did is when you go to open your.
0 kommentar(er)
